KitchenAid KRMF706EBS 使用とお手入れ

2. Turn on the ice maker by moving the switch to the (left) ON 

position. 
NOTES: 

■

To manually turn off the ice maker, move the control to the 
OFF (right) position.

■

Your ice maker has an automatic shutoff. The sensor will 
automatically stop ice production if the storage bin is full, 
if the door is open or the storage bin is removed. The 
control will remain in the ON (left) position.

3. Close the ice compartment door.

■

Remove the ice storage bin by inserting your fingers into the 
hole at the base of the bin and squeezing the latch to release 
the bin from the compartment. Lift the storage bin up and pull 
it straight out. 

■

Replace the storage bin inside the ice compartment and push 
down to make sure it is firmly in place.

■

The ice maker should produce approximately 3 lbs (1.4 kg) of 
ice per day under normal operation. 

■

To increase ice production, select the “Fast Ice” or “Max Ice” 
feature from the Options menu on the control panel. See 
“Using the Control(s).”

To turn the ice maker ON, simply lower the wire shutoff arm.
To manually turn the ice maker OFF, lift the wire shutoff arm to the 
OFF (arm up) position and listen for the click.
NOTE: Your ice maker has an automatic shutoff. As ice is made, 
the ice cubes will fill the ice storage bin and the ice cubes will 
raise the wire shutoff arm to the OFF (arm up) position. Do not 
force the wire shutoff arm up or down.

NOTE: Turn off the ice maker before removing the ice storage bin 
to serve ice or to clean the bin. This will keep the ice cubes from 
dropping out of the ice maker and into the freezer compartment. 
After replacing the ice storage bin, turn on the ice maker. 

■

The ice maker should produce a complete batch of ice 
approximately every 2 hours. 

REFRIGERATOR CARE

Cleaning

Both the refrigerator and freezer sections defrost automatically. 
However, clean both sections about once a month to avoid 
buildup of odors. Wipe up spills immediately.

Please see the exterior cleaning information specific to your 
model.

IMPORTANT: Damage to smooth finish due to improper use 
of cleaning products, or using non-recommended cleaning 
products, is not covered under the warranty. Sharp or blunt 
instruments will mar the finish. 

NOTE: Paper towels scratch and may dull the clear coat of the 
painted door. To avoid possible damage use only soft clean cloths 
to polish and wipe the door. 

A

✔ Soft, clean cloth

✘

Abrasive cloths

✘

Paper towels or newsprint

✘

Steel-wool pads

✔ Warm, soapy water -

use a mild detergent

✘

Abrasive powders or liquids

✘

Window sprays

✘

Ammonia

✘

Acidic or vinegar based 
cleaners

✘

Oven cleaners

✘

Flammable fluids