KitchenAid KRFC400ESS-SS オーナーマニュアル

2. Replace the wine rack by inserting the left-hand side into its 

bracket. Press inward on the right-hand side until it will slide 
past the bracket edge and set it into its bracket.   

Using the Controls

■

The control panel is located on the front of the ice and water 
dispenser. 

■

To access the main control menu, press any of the four touch 
pads located on either side of the display. Then, touch the pad 
next to the desired option or user setting to access the various 
features.

NOTE: Press only the touch pads next to your selection on the 
display screen, not the selection itself. 

■

Wait 24 hours for your refrigerator to cool completely before 
adding food. If you add food before the refrigerator has cooled 
completely, your food may spoil.

NOTE: Adjusting the refrigerator and freezer temperature 
controls to a colder than recommended setting will not cool 
the compartments any faster.

■

The recommended settings should be correct for normal 
household refrigerator use. The controls are set correctly 
when milk or juice is as cold as you like and when ice cream is 
firm.

■

If the temperature is too warm or too cold in the refrigerator or 
freezer, first check the air vents to be sure they are not 
blocked before adjusting the controls.  

For your convenience, your temperature controls are preset at the 
factory. When you first install your refrigerator, make sure the 
controls are still set to the recommended set points. 

■

Press the touch pad next to “FRESH FOOD TEMP” on the 
main menu to display the current set point of the 
compartment. Press the touch pad next to “WARMER” or 
“COLDER” to adjust the set point to the recommended 38°F. 
Press the touch pad next to “Done” to lock in the setting. 

■

Press the touch pad next to “FREEZER TEMP” on the main 
menu to display the current set point of the compartment. 
Press the touch pad next to “WARMER” or “COLDER” to 
adjust the set point to the recommended 0°F. Press the touch 
pad next to “Done” to lock in the setting. 

Cooling Off controls all cooling functions, the control panel and 
the dispenser. It does not disconnect power to the refrigerator. 

■

Press and hold the Cooling Off touch pad for 3 seconds. The 
LED will light up to indicate that cooling is Off. Neither 
compartment will cool. 

■

Press the Cooling Off touch pad again to turn on the cooling. 
The LED will turn off. 

The FRESH FOOD TEMP control adjusts the refrigerator 
compartment temperature. The FREEZER TEMP control adjusts 
the freezer compartment temperature. 
If you need to adjust the temperature in either the refrigerator or 
freezer compartment, use the settings listed in the chart as a 
guide.

The display will show the set point for approximately 3 seconds. 

■

Press the touch pad next to “WARMER” or “COLDER” to 
adjust the set point to the desired temperature. Then, press 
the touch pad next to “Done” to lock in the new set point 
temperature. 

NOTE: Except when first turning on the refrigerator, do not adjust 
either temperature control more than one setting at a time. Wait 
24 hours for the temperature to stabilize between adjustments. 

The Door Alarm feature sounds an audible alarm every few 
seconds when the either refrigerator door has been left open for 
3 continuous minutes. The alarm will sound until the door is 
closed or Door Alarm is turned off.
1. On the main menu, press the touch pad next to “Options.”
2. Press the touch pad next to “Door Alarm Is On” to switch 

between ON and OFF. Press the touch pad next to “Done” to 
lock in the desired setting and return to the main menu. 

The humidity control feature turns on a heater to help reduce 
moisture on the door hinge seal. Use in humid environments or 
when you notice moisture on the door hinge seal. The refrigerator 
uses more energy when Humidity Control is on.
1. On the main menu, press the touch pad next to “Options.”
2. Press the touch pad next to “Humid Ctrl Is On” to switch 

between ON and OFF. Press the touch pad next to “Done” to 
lock in the desired setting and return to the main menu. 

The vacation mode feature decreases the number of automatic 
defrost cycles. Once set, vacation mode will remain on until a 
door is opened or the feature is turned off on the control panel. 

A

A

REFRIGERATOR too warm

FRESH FOOD Control 
1° lower 

FREEZER too warm/too little ice

FREEZER Control 
1° lower

REFRIGERATOR too cold

FRESH FOOD Control 
1° higher

FREEZER too cold

FREEZER Control 
1° higher