Philips DC910/12 ユーザーズマニュアル
![Philips](https://files.manualsbrain.com/attachments/80de5467260b5059767c26fa7238b8f78bd7bc77/common/fit/150/50/0ca3a4fc6a2509197ba66802c76c9b64194b944a2b6a8471ad8854af95c2/brand_logo.png)
20
English
Clock/Timer
Clock setting
The clock can be set in either 12-hour or
24-hour mode (
24-hour mode (
12HR or 24HR for example).
1
In standby mode, press and hold
PROG/SET TIME
PROG/SET TIME
on the remote control.
2
Press VOLUME +/- on the system (or VOL +/-
on the remote control) to switch between 12
hour and 24 hour display.
on the remote control) to switch between 12
hour and 24 hour display.
3
Press PROG/SET TIME on the remote
control again to confirm.
control again to confirm.
➜
The clock digits flash on the display panel.
4
Press VOLUME +/- on the system (or VOL +/-
on the remote control) to set the hours.
on the remote control) to set the hours.
5
Press PROG/SET TIME on the remote
control again.
control again.
➜
The clock digits for the minutes flash.
6
Press VOLUME +/- on the system (or
VOL +/-
VOL +/-
on the remote control) to set the
minutes.
7
Press PROG/SET TIME on the remote
control to confirm the time.
control to confirm the time.
Timer setting
●
The system can be used as an alarm clock,
whereby the TUNER (FM)/iPod/USB/CARD
(SD/MMC) is switched on at a set time (one
time operation). The clock time needs to be set
first before the timer can be used.
whereby the TUNER (FM)/iPod/USB/CARD
(SD/MMC) is switched on at a set time (one
time operation). The clock time needs to be set
first before the timer can be used.
●
During setting, if no button is pressed within 30
seconds, the system will exit timer setting mode
automatically.
seconds, the system will exit timer setting mode
automatically.
1
In standby mode, press TIMER for more than
two seconds.
two seconds.
2
Press SOURCE on the system repeatedly (or
the respective source keys on the remote
control) to select the sound source.
the respective source keys on the remote
control) to select the sound source.
3
Press TIMER to confirm your desired mode.
➜
The clock digits for the hours flash.
4
Press VOLUME +/- on the system (or
VOL +/-
VOL +/-
on the remote control) to set the
hours.
5
Press TIMER again.
➜
The clock digits for the minutes flash.
6
Press VOLUME +/- on the system (or
VOL +/-
VOL +/-
on the remote control) to set the
minutes.
7
Press TIMER to confirm the time.
➜
The timer is now set and activated.
Activating and deactivating timer
●
In standby or during playback, press TIMER
once
once
on the remote control.
➜
Display shows if activated, and disappears if
deactivated.
Notes:
– Timer is not available in AUX mode.
– If USB/SD/MMC source is selected and no
compatible USB/SD/MMC device is plugged,
TUNER will be selected automatically.
– Timer is not available in AUX mode.
– If USB/SD/MMC source is selected and no
compatible USB/SD/MMC device is plugged,
TUNER will be selected automatically.
pg001-023_DC910_12_Eng
8/26/08, 12:07
20