Mitsubishi Electronics DX-TL16U ユーザーズマニュアル

Digital Video Recorder 

 37

 
 

 

You can assign IDs to each camera by highlighting the box under the ID heading and pressing the 

 button.  

Change the number by highlighting it and using the Up and Down arrow buttons to increase and decrease 
the number.  The PTZ ID number can be set from 0 to 256. 

 

Highlight the Setup… box and press the 

 button.  The Port Setup window appears. 

 

 

You can save your PTZ changes by highlighting Save and pressing the 

 button.  Selecting Cancel exits 

the screen without saving the changes. 

 

 

 

 

Figure 28 

─ Device Menu. 

 
You can configure the audio, alarm, display and remote control devices connected to the DVR. 

Select your camera from the list and press the 

 button.  You will need to 

connect the camera to the RS232 or RS485 connector on the back of the DVR 
following the camera manufacturer’s instructions. 

Configure the port’s setting based on the PTZ camera manufacturer’s instructions.