Mitsubishi Electronics DX-TL16U ユーザーズマニュアル

Digital Video Recorder 

 45

 
 

 
The DVR’s controls are similar to a VCR.  As with a VCR, the main functions are recording and playing 
back video.  However, you have much greater control over recording and playing back video.  You can 
establish recording schedules based on time of day and day of the week.  The DVR allows you to search 
through the recorded video using much more sophisticated tools than those available with VCRs.  Additional 
DVR features that are not available with VCRs are remote control and viewing, and recording video at the 
same time you are watching previously recorded video. 
 
The front panel controls are described in Chapter 3 ─ Configuration. 
 
 

 
Once you have installed the DVR following the instructions in Chapter 2 ─ Installation, it is ready to record. 
 
 

 
As soon as the DVR completes its initialization process, it will begin showing live video on the attached 
monitor and playing live audio through the attached speaker.  The default mode is to display all cameras 
at once.  Pressing any camera button will cause that camera to display full screen.  It displays live video 
and plays live audio until the user enters another mode. 
 
Pressing the 

Display

 button cycles the DVR through the different display formats, and pressing the 

Group

 

button changes the screen from the current camera group to the next camera group. 
 
You can display a Picture-in-Picture (PIP) by pressing the 

Display

 button in the single-screen mode.  You 

can change the location of the PIP counterclockwise and clockwise by pressing the Up and Down arrow 
buttons and moves through screen pages by pressing the Left and Right arrow buttons. 
 
While in the live monitoring mode, press the Menu button displays the following Live Monitoring menu 
at the top of the screen.  Pressing the Menu button again hides the menu.  You can navigate through menus 
and items by pressing the arrow buttons.