Mitsubishi Electronics DX-TL16U ユーザーズマニュアル
User’s Manual
54
SEARCH MENU
Search
Selecting
(Search) in the Search menu allows you to search using a recording table (Record Table Search),
select video from the event log (Event Log Search), searches text input strings (Text-In Search) or searches
motion events (Motion Search). See the following Record Table Search, Event Log Search, Text-In Search
and Motion Search sections for details.
motion events (Motion Search). See the following Record Table Search, Event Log Search, Text-In Search
and Motion Search sections for details.
Go To
Selecting
(Go To) in the Search menu displays the following GO TO menu.
Go to the First: Selecting Go to the First displays the first recorded image.
Go to the Last: Selecting Go to the Last displays the last recorded image.
Go to the Date/Time: Selecting Go to the Date/Time displays the Go to
the Date/Time screen.
the Date/Time screen.
Move the cursor over the date and time and press the
(Play/Pause) button.
You can use the Left and Right arrow buttons to highlight the year, month, day,
hours, minutes and seconds. Use the Up and Down arrow buttons to change
to the date and time you want to search for video.
hours, minutes and seconds. Use the Up and Down arrow buttons to change
to the date and time you want to search for video.
Once you have set the date and time you want, press the
button. Then highlight Go and press the
button. The selected date and time will display. (If no video was recorded during the selected time, a
message appears alerting you that no image was recorded at that time.) The
message appears alerting you that no image was recorded at that time.) The
button and arrow buttons
can now be used to review the surrounding video.
Export
Selecting
(Export) in the Search menu allows you to clip a video segment and save it. It is the same as
pressing the
Clip Copy
button on the front panel. See the following Clip Copy section for details.
Camera Menu
Selecting
(Camera Menu) in the Search menu displays the following Camera Menu.
NOTE: The video signal has a time difference of 1/60 second (1/50 second for PAL) between odd
and even fields because it is composed of 60 interlaced fields per second (50 fields for PAL). When
recording video with Very High (D1) resolution, video is made up of frame units combining two fields –
one odd field and one even field. This can cause horizontal scan lines or flashes in areas with motion
because of the time difference between the two fields. Turning on the de-interlace filter provides
clearer video by eliminating these horizontal scan lines and flashes.
and even fields because it is composed of 60 interlaced fields per second (50 fields for PAL). When
recording video with Very High (D1) resolution, video is made up of frame units combining two fields –
one odd field and one even field. This can cause horizontal scan lines or flashes in areas with motion
because of the time difference between the two fields. Turning on the de-interlace filter provides
clearer video by eliminating these horizontal scan lines and flashes.
Zoom: Selecting Zoom and choosing the camera number zooms the current playback
image of the selected camera on the screen. It is the same as pressing the
image of the selected camera on the screen. It is the same as pressing the
PTZ/Zoom
button on the front panel. Selecting Zoom again exits the Zoom mode.
Audio: Selecting Audio toggles audio playback On and Off. Recorded audio will
be played when the DVR displays a camera with recorded audio in full screen mode.
be played when the DVR displays a camera with recorded audio in full screen mode.
Enable De-Interlace: Selecting Enable De-Interlace turns the de-interlace filters on.