Honeywell HRXD16 ユーザーズマニュアル
Operation
102
1.
Press SPOT on the front panel or remote control, then select one of four Spot
Monitors.
Monitors.
2.
Select the camera to be displayed on the Spot Monitor.
Figure 4-6
Spot Monitor Menu
If you want to display more than one camera on a Spot Monitor, you can display them
sequentially:
sequentially:
1.
In the Spot Monitor selection mode, press SEQUENCE on the front panel or
remote control, or select Sequence On from the menu to start displaying cameras
sequentially.
remote control, or select Sequence On from the menu to start displaying cameras
sequentially.
2.
Press SEQUENCE or select Sequence On again to stop sequencing on the Spot
Monitor.
Monitor.
Any cameras that are Off, have lost video or are set to Covert (unless the user has
authority to view covert cameras) will be excluded from the sequence.
authority to view covert cameras) will be excluded from the sequence.
Figure 4-7
Sequence Menu
The Spot Monitor 1 supports multi-view formats and displays live video using the same
settings as the main monitor.
settings as the main monitor.
When the Spot Monitor is in the sequence mode, you can set the camera’s display dwell
time. Refer to
time. Refer to
on
for details.