Mitsubishi Electronics XD8600 ユーザーズマニュアル

EN-57

•  The captured image is displayed in the NATIVE

mode automatically.

12.Adjust the size of the image to be captured so that 

such image stays within the red frame. 
•  Press the , ,  or  button to move the red 

frame.

•  You can’t move the red frame outside the screen. 

•  Press the MENU button to cancel the procedure.

13. Press the ENTER button twice.

•  Image capture will start.

CAPTURING IMAGE !

•  When the image capture completes, the 

captured image will be displayed for 1 second. 

Important:
•  You can’t change the new startup screen back to 

the original startup screen. (Even when you select 
RESET ALL in the FEATURE menu, the factory 
default screen isn’t available any longer.) When you 
want to change the startup screen again, capture 
another image.

•  The captured image will be displayed from the next 

startup. If the captured image isn’t displayed, make 
sure that the setting of SPLASH SCREEN in the 
INSTALLATION 2 menu isn’t OFF. (See page 35.)

•  When BACK COLOR in the INSTALLATION 2 

menu is set to IMAGE, the captured image will be 
displayed while no signal is supplied. 

•  When no video signal is supplied, the projector

takes some time to display the captured image.  

•  Some images can’t be captured correctly because 

of their signal type. 

•  When SIZE of CUSTOM IMAGE CAPTURE is FULL

and the size of the captured image is different 
from that of the projection screen being used, the 
displayed image is cropped and the background 
color is visible. In such a case, capture images at 
the current projection size.

You can display your desired image as the startup 
screen (or splash screen). By setting the menu, you 
can use such image instead of the background image 
that is displayed when no video signal is supplied.
Important:
•  You can’t set IMAGE CAPTURE when PASSWORD 

FUNCTION in the FEATURE menu has been set to 
SPLASH ID SCREEN to enable the password lock.

•  You can’t set IMAGE CAPTURE when the 

component video signal is inputted.

(See page 31 for menu setting.)  
1.  Press the COMPUTER button to select the image 

supplied to the COMPUTER/COMPONENT VIDEO 
IN terminal.

2.  Display your desired image.
3.  Display the INSTALLATION 2 menu.
4.  Select IMAGE CAPTURE by pressing the  or  

button.

5.  Press the ENTER button.

•  The setting menu will be displayed.

1

1

2

2

Set the background color
(Set the background color only when you set the 
image size to x1 or x2.)
6.  Select BACK COLOR by pressing the  or  

button.

7.  Select your desired color for the background 

(GRAY, RED, GREEN, BLUE, BLACK, WHITE, 
RED50%, GREEN50%, or BLUE50%) by pressing
the  or  button. 

Set the image size
8.  Select SIZE by pressing the  or  button.
9.  Select x1, x2, or FULL by pressing the  or  

button. 

x1

x2

FULL

Capture the image
10. Select CAPTURE by pressing the  or  button.
11.Press the ENTER button.

•  A red frame appears. (The size of the red frame 

is 640 x 480 pixels.)

•  The image within the outer edges of the red

frame is captured.