Multiquip BA ユーザーズマニュアル

1. To pitch the blades upwards using the 

, (Figure 28) simply squeeze the trigger lock

and pull the

 towards the operator. Pushing

the

 towards the engine will cause the blades

to lay flat.

1. To pitch the blades upwards using the "

" handle,

(Figure29) simply turn the 

 clockwise. Turning the

star wheel counter clockwise  will cause the blades to lay flat.

1.

Get into the operator’s position behind the handle. With a
secure foothold and a firm grasp on the handles slowly
increase the engine speed until the desired blade speed is
obtained.

If your trowel has a 

, set your engine

speed with the throttle, then pull on the hand clutch lever to
start the blades turning. Adjust the blade speed after the hand
clutch is fully engaged.

The following steps are intended as a basic guide to machine
operation, and are not to be considered a complete guide to
concrete finishing. We suggest that all operators (experienced
and novice) read “

” published by the 

.  Read the “Training”

section of this manual for more information.

2.

To maneuver the trowel, gently lift up on or press down on the
main trowel handle. To move the machine to the operator’s
left, 

 on the handle, to move machine to the right, 

 on the handle.

3.

The best method for finishing concrete is to slowly walk
backwards  (Figure 31) with the trowel, guiding the trowel
from side to side. This will cover all footprints on wet concrete.

4.

Remember that if you let go of the trowel, just step away and
let the trowel come to a complete stop before trying to recover
the trowel.