Multiquip LT12D ユーザーズマニュアル

8

6

11

10

12

14

15

16

17

1

2

4

5

7

9

3

13

18

18

Figures 3 and 4 show the location of the controls and 
components for the LT12 series light tower. The function 
of each control is described below.

1. 

— Unscrew this knob 

to release mast for rotation. Tighten this knob to lock 
mast after it is set to the desired position.

2. 

— Use this winch to extend 

the mast to the desired height. Maximum height is 
approximately 31.5 feet (9.6 meters).

3. 

— Grip these handles to rotate 

mast to desired position.

4. 

— Light tower can be lifted using this lifting 

bale. The lifting bale is balanced for a fully confi gured 
light tower. Removal of any components will unbalance 
the lifting bale.

5. 

— Light tower can be lifted using 

these forklift pockets. Insert the forks of the forklift as 
far possible into the pockets.

6. 

— When towing of the light 

tower is required, place the tower mast into the cradle 
support. Make sure cradle lock/release pin has been 
inserted and mast is locked.

7. 

— Allows the lamps to be mounted vertically or 

horizontally.

8. 

— Four 1000-watt metal-halide bulbs with 

a 110,000 lumens capacity each. Light coverage is 
typically between 5 to 7 acres.

9. 

— Locks mast in cradle 

support and releases mast when removed.

10. 

— There are two jackstands located 

at the rear of the trailer. Use these jackstands to level 
and support the light tower.

11. 

— Place these blocks (not included 

as part of the light tower package) under each trailer 
wheel to prevent rolling.

12. 

— Use these 2 outrigger jacks to 

level and support the light tower. For more stability, the 
outriggers can be deployed.

13. 

— Use this jackstand to support 

the tongue when attaching the light tower to a towing 
vehicle.