Multiquip MQ41TDH ユーザーズマニュアル

For storage of the pump for over 30 days, the following is
required:
z Drain the fuel tank completely.
z Run the engine until the fuel in the injection system is

completely consumed.

z Completely drain used oil from the engine crankcase

and fill with fresh clean oil, then follow the procedures
described in the engine manual for engine storage.

z Remove the drain plug from the pump and drain out any

water from left in the housing.

z Remove the pump cover and clean inside of pump

housing. Coat inside of pump housing with a light film of
oil to reduce corrosion. A spray can of oil works well for
this application.

z Cover suction and discharge ports with duct tape to

prevent any foreign matter from falling into pump.

z Cover pump and engine with plastic covering or

equivalent and store in a clean, dry place.