Mitsubishi Electronics FR-A500 ユーザーズマニュアル

7

To ensure safety, remove and reinstall the operation panel after powering off.

• Removal

Hold down the top button of the operation panel and pull the operation panel toward you to remove.

When reinstalling the operation panel, insert it straight and reinstall it securely.

• Reinstallation using the connection cable

1) Remove the operation panel.

2) Disconnect the modular jack type relay connector. (Place the disconnected modular jack type relay

connector in the modular jack type relay connector compartment.)

3) Securely plug one end of the connection cable into the PU connector (modular jack type relay

connector) of the inverter and the other end into the operation panel. (Refer to page 25 for the

connection cable.)

Note: Install the operation panel only when the front cover is on the inverter.

‚

 Removal

 Reinstallation

Modular jack type relay connector compartment

Modular jack type relay connector