Manitowoc Ice K00105 プリント

1.  Use the K00105 to install 22” B, J, Q, or S-series ice machines on a Manitowoc C-170, C-400, C-470, or C-570 bin. 
2.  Installation (bin to be level before starting): 

A.  Remove the hinge on the left side of the bin. 
B.  Remove the foam tape on the left rail.  Trim back the foam tape on the front and rear bin rails, as shown. 
C.  Position the adapter panel and hinge on bin and fasten with the two existing screws. 
D.  Using the adapter as a template, drill three 5/32” (4 mm.) holes, .500” (12.7 mm.) deep maximum, in the rear of 

the bin (adapter must be level with bin).  Warning:  Do not drill through interior liner.  Attach with the screws 
provided. 

E.  Apply foam tape to the edge of the adapter, as shown.  Note: We recommend using RTV at intersections and 

along front inside edge of foam tape to prevent water tracking.  Use double thickness with S-series ice machines. 

3.  Refer to ice machine installation manual for ice machine installation procedures. 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Manitowoc Ice, Inc. 

2110 South 26

th

 Street, P.O. Box 1720, Manitowoc, WI  54221-1720 USA                                                                                                

Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879                               

              8008913             

Web Site - www.manitowocice.com                                                                                                                                       

     Rev. 05/12/04               

Ice 

Back 

Existing two 

Screws 

 

Hinge 

Foam Tape from Kit (trim to

fit) - Double Thickness of 

Tape with S-series 

Screws from Kit 

Drill three 5/32” dia. 

Holes (use Adapter as a 

Template to Locate Holes 

on Bin) 

Trim Back Existing Foam Tape 

 8 11/16” 

Double Thickness of Tape 

with S-series