Multiquip CX100HF ユーザーズマニュアル
PAGE 14 — CX-HF SERIES HAND MIXERS — OPERATION AND PARTS MANUAL — REV. #3 (03/11/08)
CX-HF SERIES HAND MIXERS — OPERATION
1.
To start , press the starting lockout button then press
the ON/OFF switch (Figure 4). The integrated electronic
controls will start the machine in a controlled speed.
the ON/OFF switch (Figure 4). The integrated electronic
controls will start the machine in a controlled speed.
2.
To make the motor run faster, apply more pressure to
the ON/OFF switch.
the ON/OFF switch.
3.
To change the maximum speed, first make sure that
the power is off then turn the gear selection lever 180°
(Figure 5). First gear is slow and second gear is fast.
Turn only when machine is not in motion.
the power is off then turn the gear selection lever 180°
(Figure 5). First gear is slow and second gear is fast.
Turn only when machine is not in motion.
Figure 4. ON/OFF Switch
Figure 5. Gear Selection Lever
CAUTION
ALWAYS hold the machine with both hands while working.
4.
When submerging the mixing tool in the mixing material
or when lifting out the mixing tool, always reduce the
speed. When the mixing tool is fully submerged,
increase the speed again to ensure that the motor is
adequately cooled.
or when lifting out the mixing tool, always reduce the
speed. When the mixing tool is fully submerged,
increase the speed again to ensure that the motor is
adequately cooled.
5.
During mixing, guide the mixer around the mixing
container (Figure 6). Continue mixing until all of the
material is completely mixed.
container (Figure 6). Continue mixing until all of the
material is completely mixed.
6.
To stop the mixer, release the ON/OFF switch.
7.
Always clean the mixing tool after every use.
Figure 6. Mixing the Material
GUIDE
MIXER
MIXER
1
2
ON/OFF SWITCH
STARTING
LOCKOUT
BUTTON
LOCKOUT
BUTTON
2.
1.
SLOW
FAST