Motorola HMVC3050 ユーザーズマニュアル

 

3 

Installing your camera is a simple process.  

Choose an appropriate location for the Wireless Motion Sensor Camera as described in the Installation Hints. 

Plug the AC adapter into the wall and the module. 

Register your camera with your Wireless System Controller using a process called Discovery. Refer to your 
Wireless System Controller documentation for instructions on how to discover your Wireless Motion Sensor 
Camera. 

Mount the module, using either the tabletop base, or by following the instructions for wall mounting. If using the 
table mount, slide the power switch on the base to On. 

 

 

 

Please consider the following points when mounting the camera: 

• 

The camera must be aimed so that it does not directly face the sun or any bright light; otherwise, this may cause 
damage to the camera. 

• 

Avoid viewing areas where half of the area is in bright sunlight and the other half is dark. All types of cameras 
have difficulty seeing wide variations of light. 

• 

The Motorola Wireless Motion Sensor Camera is constructed of UV-resistant ABS plastic. If installing the 
Wireless Motion Sensor Camera outside, it should be shielded from the elements, such as underneath a porch 
roof. Do not install the camera where it is subjected directly to the elements. 

• 

Typically, the camera's wireless reception is good to up to 60–80 feet from the Wireless System Controller, 
depending on the number of obstacles. These can include metal framing, thick walls, and other wireless devices 
operating at 2.4 GHz. It is recommended that different positions be tried.