Mitsubishi Electronics CP700E ユーザーズマニュアル

84

1

 

Error messages and countermeasures

1

If  for some reason printing is not possible or error occurs during printing, the error  message  will  be displayed on the

monitor screen or LCD.

In this case, follow the procedure described below.

Error messages

DOOR  OPEN

PAPER  EMPTY

SHEET  CARTRIDGE  EMPTY

OVER  HEAT

SHEET    END

PAPER  JAM  J11

PAPER  JAM  J12

PAPER  JAM  J13

PAPER  JAM  J14

TECHNICAL  ERROR   J22

TECHNICAL  ERROR   J23

TECHNICAL  ERROR   J24

Causes

The printing unit is not

inserted correctly.

Paper is not set.

Paper is not set correctly.

Paper runs out during printing.

*Note : 1

The ink-cassette is not installed.

The temperature inside the unit

becomes too high.

The ink-sheet is used up.

Paper jamming occurs.

Other defects.

Countermeasures

Insert the printing unit until it is locked in

the unit.

Set the print paper correctly.

Refer to pages 7 - 8.

Install the ink-cassette.

Refer to page 8.

Wait until the message goes off.

*Note : 2

Replace the ink-sheet with a new one.

Refer to page 8.

Refer to “Overcoming paper jams”.

Press the MEMORY button for more 1

second while pressing the MONITOR

button.    *Note : 3

If the status is not improved by carrying

out this measure, consult your dealer.

*Note : 1

In case of L-size printing, the image is not printed completely.

*Note : 2

When setting the continuous printing, the continuous printing is carried out after the
error message goes off.

*Note : 3

This is an operation for initialization. Make sure to press the MONITOR button first. If
the MEMORY button is pressed first, a new image will be stored in memory erasing any
previously stored image.