Multi-Tech Systems MVP-130/130FXS ユーザーズマニュアル

 

Cabling involves connecting the MultiVOIP to your LAN and telephone 
equipment.  

1. 

.  If both channels of your MVP210 MultiVOIP 

will be using either FXS, FXO, or E&M telephony interfaces, skip to 
step 2. 

For any channel on which you are using the DID interface type, you 
must change the jumper on the MultiVOIP circuit card. 

  a. Disconnect power.  Unplug the AC power cord from the wall outlet 

or from the receptacle on the MultiVOIP unit. 

  b. Using a #1 Phillips driver, remove the screw (at bottom of unit, 

near the back-cover end) that attaches the main circuit card to the 
chassis of the MVP210. 

c. Pull the main circuit card out about half way.