Multi-Tech Systems MVP-130/130FXS ユーザーズマニュアル

 

Configuring software for your MultiVOIP entails three tasks:   
(1) loading the software onto the PC (this is “Software Installation and 
is discussed in this chapter),  
(2) setting values for telephony and IP parameters that will fit your 
system (this is “Technical Configuration” and it is discussed in Chapter 
5 for T1/E1 MultiVOIP units and in Chapter 6 for analog MultiVOIP 
units), and  
(3) establishing “phonebooks” that contain the various dialing patterns 
for VOIP calls made to different locations (this is “Phonebook 
Configuration” and it is discussed in Chapters 7, 8, and 9 for T1, E1, 
and analog MultiVOIP units respectively). 

The software loading procedure does not present every screen or option 
in the loading process.  It is assumed that someone with a thorough 
knowledge of Windows and the software loading process is performing 
the installation.   

The MultiVOIP software and User Guide are contained on the 
MultiVOIP product CD.  Because the CD is auto-detectable, it will start 
up automatically when you insert it into your CD-ROM drive.  When 
you have finished loading your MultiVOIP software, you can view and 
print the User Guide by clicking on the View Manuals icon. 

1. Be sure that your MultiVOIP has been properly cabled and that the 

power is turned on.