Multi-Tech Systems MVP-130/130FXS ユーザーズマニュアル

 

The procedures “Phone/IP Starter Configuration” and “Phonebook 
Starter Configuration” must be completed before you can do this 
procedure. 

1. These connections must be made: 

MultiVOIP to local PBX 

MultiVOIP to local phone 
station 
 –OR--  
MultiVOIP to extension of 
key phone system 

MultiVOIP to command PC 

MultiVOIP to command PC 

MultiVOIP to Internet 

MultiVOIP to Internet 

2. Inbound Phonebook and Outbound Phonebook must both be set up 

with at least one entry in each.  These entries must allow for 
connection between two voip units. 

3. Console messages must be enabled.  (If this has not been done 

already, go, in the MultiVOIP GUI, to Configuration | Logs and 
select the “Console Messages” checkbox.  

4. You now need to free up the COM port connection (currently being 

used by the MultiVOIP program) so that the HyperTerminal program 
can use it.  To do this, you can either (a) click on Connection in the 
sidebar and select “Disconnect” from the drop-down box, or (b) close 
down the MultiVOIP program altogether.