Multi-Tech Systems MVP-130/130FXS ユーザーズマニュアル

 

Attaching the MultiVOIP to a rack-rail of an EIA 19-inch rack enclosure 
will certainly require two persons.  Essentially, the technicians must 
attach the brackets to the MultiVOIP chassis with the screws provided, 
as shown in Figure 3-6, and then secure unit to rack rails by the 
brackets, as shown in Figure 3-7.  Because equipment racks vary, screws 
for rack-rail mounting are not provided.  Follow the instructions of the 
rack manufacturer and use screws that fit.  

1.  Position the right rack-mounting bracket on the MultiVOIP 

using the two vertical mounting screw holes. 

2.  Secure the bracket to the MultiVOIP using the two screws 

provided.  

3.  Position the left rack-mounting bracket on the MultiVOIP 

using the two vertical mounting screw holes. 

4.  Secure the bracket to the MultiVOIP using the two screws 

provided.  

5.  Remove feet (4) from the MultiVOIP unit. 
6.  Mount the MultiVOIP in the rack enclosure per the rack 

manufacture’s mounting procedure. 

x

x