Datalogic Scanning M8300 ユーザーズマニュアル
POWERSCAN
®
D8330/M8300
168
5.14.3 Copy BC-80X0
Procedure:
c
Using the slave reader and its BC-80X0 cradle, read the Restore Default
barcode, set the radio address, and then read the RS-232 interface barcode
from chapter 4 of this manual or from the Quick Reference Guide.
from chapter 4 of this manual or from the Quick Reference Guide.
d
Connect the master BC-80X0 and the slave BC-80X0 (cradle to be configured)
together through two RS-232 serial interface cables and external power supply.
Accessory cables and power supply are available from your Datalogic
distributor to provide this connection.
Accessory cables and power supply are available from your Datalogic
distributor to provide this connection.
RS-232 Cables: CAB471 & CAB472
Power Supply: PG12
e
Read the Configuration Copy barcode below with a reader. Then place it onto
the master BC-80X0 cradle.
Copy Configuration
Ì$+ZZ3$-9Î
The configuration will be copied from the master BC-80X0 to the slave
BC-80X0. The reader signals the end of the procedure with a series of beeps.
f
f
Repeat the procedure above to configure other slave cradles.
Note: The master BC-80X0 can be configured for any interface.