Honeywell HRSD16 ユーザーズマニュアル

Configuration

74

1.

Highlight the fields under ips and press 

 to set the images per second for 

Time and Event recording. You can select from a range of 0.10 to 30.0 images per 
second. 

Highlight the field under the Range heading and press 

 to change the time 

range that the scheduled recording takes place. The schedule is based on a 
24-hour clock, and the smallest time segment you can use is 15 minutes. 

Highlight the field under the Mode heading and press 

 to change the recording 

mode that is used. Choose from: No Record, Time, Event, and Time & Event.

When the DVR is in the No Record mode, it does not record during the preset day 
and time range as long as the PANIC button is not pressed. Use the No Record 
mode when you do NOT want the DVR to record during certain times. 

When the DVR is in the Time mode, the 

 icon displays at the top-left corner of 

the screen. The DVR records, and displays the 

 icon at the top-left corner of the 

screen during the scheduled times.

When the DVR is in the Event mode, the red 

 icon displays at the top-left corner 

of the screen. The DVR records and displays the 

 icon at the top-left corner of 

the screen when any event occurs. 

When the DVR is in the Pre-Event recording mode, the yellow 

 icon displays 

when there is no event and the DVR is not recording. 

When the DVR is in the Pre-Event mode, the red 

 and 

 display when any event 

occurs and the DVR starts recording.

When the DVR is in the Time & Event mode, the DVR follows the Time settings and 
the 

 icon displays. The DVR follows the Event settings and the 

 icon displays.

Highlight the field under the Channels heading, and press 

 to select which 

cameras record during that scheduled time.

Highlight the field under the Settings heading, and press 

 to define the 

recording settings. You can set the ips and Quality of the recording for any modes 
you set up in the Mode column. If you do not set the ips and Quality in the Settings 
column, the DVR follows the default settings. See 

on 

page 

 for details.

Highlight the field under the   heading and press 

 to delete the recording 

settings. You are asked to confirm that you want to delete the settings. 

Highlight Default… and press 

. The Default Setup screen appears.