Honeywell HRSD16 ユーザーズマニュアル

Configuration

Document 800-00918

 

Rev F

77

02/08

In the Alarm-In Settings tab, you can:

•

select which alarm-in devices are active

•

name the individual alarm-in device

•

change the settings for each input (NO or NC)

•

select alarm input associated with panic recording

To turn each input On or Off, highlight the alarm number and press 

.

To give each input a title, highlight the desired Title field and press 

. A virtual 

keyboard appears with which you can enter a title name.

Each input can be set as NO (normally open) or NC (normally closed). Highlight the 
Type field, and press 

 to toggle between On and Off.

You can set the DVR to start panic recording whenever the DVR senses an input from 
one of the alarm input connectors. 

1.

Highlight the field beside Panic Record, and press 

. A list of alarm inputs 

appears. 

2.

Select which alarm input you want associated with panic recording by scrolling 
with the UP and DOWN arrows, then press 

. 

If panic recording is triggered as a result of the settings from the 
Alarm-In menu, then the DVR continues recording until input on 
the selected alarm stops. You can also press PANIC on the DVR 
to stop panic recording.

You can set the actions the DVR takes whenever it senses an input from the alarm input 
connectors. 

In the Alarm-In Actions 1 tab, you can choose the cameras, the Alarm-Out output 
connectors, and the notification actions for each Alarm-In input connectors.

In the Alarm-In Actions 2 tab, you can choose PTZ camera preset positions and spot 
monitor actions. 

In the Alarm-In Actions 1 tab, you can choose the cameras, the Alarm-Out output 
connectors, and the notification actions for each Alarm-In input connectors. 

Highlight the Actions 1 tab. The Actions 1 setup screens appear.