Motorola DCH6416 ユーザーズマニュアル

32

 

3.  When the desired new frequency has been selected, press the 

SELECT

 key to 

start the search. The manual frequency search will last up to 40 seconds. As the 
set-top searches, the frequency being searched for will flash on the front panel. 
On the OSD, the “MAN FREQ” line of text will be cleared, the “HUNT MODE” will 
display “FIX” to indicate a search on a fixed frequency, and the “OOB FREQ” field 
will change to the frequency being searched for. 

4.  If the frequency is found with the proper EMM Provider ID, then the front panel 

will display the normal OOB receiver status. The OSD “LKC” field will change to 
display the new frequency. 

5.  If after 40 seconds the frequency search is not successful, the product will 

perform a warm reset. 

6.  To abort a search without waiting the 40 seconds, the 

POWER

 key can be 

pressed to cause an immediate warm reset. 

This diagnostic displays the in-band status for the last attempted tuned channel. The 
information is updated every 5 seconds.