MotoSAT Nomad 2 ユーザーズマニュアル

 

6

1.  Turn ON power. 
2.  After 10-15 seconds (after Nomad power up sequencing) press the 

FIND button. 

The dish will search out and lock onto the proper programmed 
satellite. 
3.  Pressing the FIND button while on satellite will initiate a re-peaking 

sequence.   

 

1.  Turn ON power. 
2.  After 10-15 seconds (after Nomad power up sequencing) press the 

FIND button. 

The dish will search out and lock onto the proper programmed 
satellite. 
3.  Pressing the FIND button while on satellite will initiate a ‘FIND 

NEXT SATELLITE’ routine.  

 
 

1.  Turn ON Power. 
2.  If ON a Satellite when turning the Power ON, the system will search 

for the next available satellite in sequence. 

3.  If NOT ON a Satellite, the system will search for the primary satellite 

for the service subscribed to. 

4.  Once the system has located a satellite, the Power will turn OFF. 

 
 

 

When Power is turned ON the system will go through steps 1-4 above.   

 
 
 

 

1.  Press the STOW button and the dish will stow, or return, to the proper 

travel position.