Mitel 5 ユーザーズマニュアル

ページ / 80
Administrator Phone Guide
28
9.
When you have finished programming the administrator telephone set, press the Speaker 
button or # repeatedly to exit the programming session. 
Changing Phone Extension Numbers
You can change the extension number for any system phone. The new extension number 
cannot be the same as an existing number.
To change a phone extension number:
1.
Dial 9932 (9132 in Europe). If a passcode is required (see page 25), 
ENTER PASSCODE 
appears (otherwise, go to 
2.
Enter the passcode, and then press #
ENTER DATABASE OPTION (1 - 3) appears
3.
Press 2 or the SYSTEM menu button. 
ENTER SYSTEM OPTION (1 - 4) appears
4.
Press 4 or the STN EXTENSION menu button. ENTER SYS STN OPTION (1 - 2) appears.
5.
Press 1
 
or the CHANGE EXT menu button. 
ENTER STATION EXTENSION appears
6.
Enter the extension number, or enter a partial extension number, and then press # or the 
ACCEPT menu button. The extension information that best matches the partial number 
appears. You can use the Volume buttons or the NEXT and PREVIOUS menu buttons to 
scroll through entries. 
7.
Press # or the ACCEPT menu button to accept the entry. 
8.
After you select an extension, 
CHANGE <extension>
 
TO EXTENSION appears
9.
Enter the new extension number for the phone, and then press or the ACCEPT menu 
button to accept the entry. UPDATING DATABASE appears for approximately four seconds 
followed by DATABASE UPDATED. 
10. When you have finished programming the administrator telephone set, press the Speaker 
button or # repeatedly to exit the programming session. 
Note: 
You must return to the ENTER SYSTEM OPTION (1 - 4) menu to save Reminder Message 
changes.
Note: 
At any time, you can press
 
*
 to return to the previous menu, or press the Speaker button 
to exit the programming session and cancel any unsaved changes.
Note: 
If you entered an extension number that is already assigned, CONFLICTING EXTENSION 
appears. After ENTER STATION EXTENSION appears, enter another extension number.