Multi-Tech Systems MVP-2410 ユーザーズマニュアル

Write down the values for these IP parameters.  You will need to enter these
values in the “IP Parameters” screen in the Configuration section of the
MultiVOIP software.  You must have this IP information about every VOIP in
the system.

The following parameters must be known about the PBX or telco central office
equipment to which the T1 MultiVOIP will connect:

➼ T1 Phone Parameters

T1 Telephony Parameters:

Record for this VOIP Site

#

• Which frame format is used?  

ESF

___ or  

D4

___

• Which CAS or PRI protocol is used? ______________
• Clocking: Does the PBX or telco switch use

internal

 or 

external

 clocking? _________________

Note that the setting used in the voip unit will be the
opposite of the setting used by the telco/PBX.

• Which line coding is used?  

AMI

___ or  

B8ZS

___

Write down the values for these T1 parameters.  You will need to enter these
values in the “T1/E1 Parameters” screen in the Configuration section of the
MultiVOIP software.