Panasonic 524X07801B ユーザーズマニュアル
184
DBS 576 (USA), Revised 6/11/98
576-13-700
Chapter 5. Key Telephone Features
Section 700 - Operation
Operation
To link multiple SSD numbers to a PSD bin:
To use a PSD Key that links multiple SSDs:
To manually link speed dial keys together:
Hardware Requirements
•
N/A
Action
Result
1. Determine the SSD bin numbers to be linked
2. Lift the handset or press the ON/OFF key.
3. (A) Press the PROG key.
(B) Press the AUTO key.
OR...
(A) Enter the Speed Dial Set/Clear code (default = 710).
4. Enter the PSD bin number (80-90).
Enter Spd Dial
displays
5. Press the AUTO key.
6. Enter the SSD bin number (00-79 or 000-799) that contains
the first part of the number to be dialed.
7. Repeat steps 5-6 up to 5 more times for all additional SSDs
to be dialed.
8. Press the HOLD key when finished.
Stored PSDXXX
displays
Action
Result
1. If necessary, select the trunk group (9, 81-84). (Normally
the trunk is selected by the speed dial numbers.)
2. Press the PSD key.
Action
Result
1. Lift the handset or press the ON/OFF key.
Intercom dial tone
2. If necessary, access an outside line.
3. If you are using a PSD number, press the one-touch key for
the first part of the number.
If you are using an SSD number, press the AUTO key, then
enter the SSD bin number.
enter the SSD bin number.
4. Use the one-touch keys or press the AUTO key and enter
the SSD codes to dial the parts of the phone number until it
is completed.
is completed.