Netcomm V24W ユーザーズマニュアル

NetComm VoIP WiFi Phone V24W User Guide 

 

 

 

 
  
 
This chapter provides instructions for first-time installation and use of the NetComm V24W 
Phone. Firstly, you need to insert the battery into the V24W Phone and then configure it for your 
wireless network and VoIP service. After that, you will be able to make and receive Internet 
phone calls. 
 

 
To insert the battery, follow these instructions: 
 
1.   Remove the battery compartment cover by pressing the silver button and sliding the 
battery cover downward. 
 
2.   Insert the battery and ensure that the metal contact at the bottom of the battery align 
with the metal contact the top of the battery compartment. 
 
3.  Replace the battery cover by sliding it upward until it snaps into place. 
 
 

 
1. 

Plug the USB mini-B connector of the included power adapter into the 

USB mini-B port of the IP Phone. Then connect the power adapter to a standard 
electrical outlet. 
 
2.  The Power LED will flash, alternating between blue and purple. For the initial 
charge, allow the battery to charge for at least 10 hours, so the battery will have 
a full charge, which is indicated by a solidly lit Power LED. This will maximizes 
battery performance and life. 
 

NOTE:   When the battery is low on power, it will emit one warning sound or vibration, 
unless the Ring Type is set to Silent. (For more information about Ring Types, refer to 

Chapter 4: Configuring the V24W WiFi VoIP Phone.”) 

 

 

Press the Power button to turn on the V24W phone 

 

 

 

YML873 V24W User Guide - 7