GE 25982xx3 ユーザーズマニュアル

Tone/Pulse Dialing

NOTE: This setting may be made only with the base.

1. Press the menu/flash button until 4

1TONE 2PULSE shows in the display. 1TONE is

the default.

. Press the caller id (9 or :) button or the touch-tone pad to scroll to

1TONE or

2PULSE.

3. Press mute/menu to save. You will hear a confirmation tone.

Transfer ON/OFF

NOTE: This setting may only be made with the handset.

In order to use the call Transfer feature (applicable ONLY with additional handsets),

you must have the Transfer ON/OFF set to ON through the menu of each handset.
1. Press the mute/menu button until

TRANSFER 4 1OFF shows in the display.

. Use the CALLER ID-VOLUME (6 or 5) button or the touch-tone pad on the handset

to scroll to

2ON.

3. Press mute/menu again to save. You will hear a confirmation tone.

Registration (Link Cordless Handset)

NOTE: If a handset become de-registered or inoperative, it may be

necessary to register the cordless handset(s) again.

Registration links the base to a cordless handset. Once a handset is registered it

can use the base’s phone connection. A cordless handset will not operate until it is

registered to the base. During the registration process, keep the handset near the base.
1. Press the menu/flash button on the base until LINK HANDSET ? shows in the

display. 2 NO is the default setting.

. Press the 1 number key or press the caller id (9 or :) button on the base to scroll

to 1YES.

3. Press menu/flash on the base to confirm handset is linked to the base.

WAITING

HANDSET REGISTRATION shows in the display.

4. Press the mute/menu button on the handset until LINK BASE? shows in the display.

NO is the default setting.

5. Press CALLER ID-VOLUME (6 or 5) button on the handset to scroll to YES.
6. Press mute/menu on the handset again to confirm. You will hear a long

confirmation tone when the handset is successfully linked to the base.