GE 25982xx3 ユーザーズマニュアル

5. Press the memory button or mem button again to save your selection. The display

shows ENTER TEL NUMBER.

NOTE: If you make a mistake, press the delete button on the base

or chan/delete on the handset to backspace and erase the wrong

character(s) or number(s).

6. Use the touch-tone pad to enter the area code followed by the telephone number

(up to 4 digits, including pauses) and press the memory button or mem button again

to save your selection. You will hear a confirmation tone.

7. To enter another name and number in a different memory location, return to step 1

and repeat the process.

Storing a Redial Number

1. Make sure the phone is OFF (not in TALK mode).
. Repeat step 1 through 6 in Storing a Name and Number in Memory.
3. Press redial to display the redial number and name.
4. Press memory or mem button again to confirm.

NOTE : If the number you want to redial has more than 24 digits,

the telephone number cannot be stored in memory.

Inserting a Pause in the Dialing Sequence

Press the #pause button on the touch-tone pad to insert a delay in the dialing

sequence of a stored telephone number when a pause is needed to wait for a dial tone

(for example, after you dial 9 for an outside line, or wait for a computer access tone.)

Each pause counts as 1 digit in the dialing sequence.

Reviewing, Changing or Deleting Stored

Names/Numbers

To Review: Press mem button on the handset or memory button on base, then press

the caller id (9 or :) button (on base) or the CALLER ID-VOLUME (6 or 5) button (on

cordless handset) to scroll through the stored numbers. Or press the memory location

number.
To Change: Follow the steps under Storing a Name and Number in Memory except

replace the stored name or number with the new information.