Motorola CDMA-EVDO REV A ユーザーズマニュアル

6 - 24 MC75 User Guide

This section describes how to set up and use the cables. The cables are available with a variety of connection 
capabilities.

The following communication/charge cables are available:

Serial (RS232) Charge cable (9-pin D female with power input receptacle)

USB Client Charge cable (standard-A connector and a barrel receptacle for power)

Auto charge cable

DEX cable

Modem inverter cable

Charge only cable.

The following printer cables are available directly from Motorola:

O’Neil Printer cable

Zebra Printer cable.

Communication/charge cables:

Provide the MC75 with operating and charging power when used with the Motorola approved power supply.

Synchronize information between the MC75 and a host computer. With customized or third party software, it 
can also synchronize the MC75 with corporate databases.

Provide serial connection through the serial pass-through port for communication with a serial device, such 
as a host computer. For communication setup procedures, refer to the MC75 Integrator Guide.

Provide USB connection through the USB pass-through port for communication with a USB device, such as 
a host computer. For communication setup procedures, refer to the MC75 Integrator Guide. 

Dedicated printer cables provide communication with a printer.

The communication/charge cables can charge the MC75 battery and supply operating power.

To charge the MC75 battery:

Connect the communication/charge cable power input connector to the Motorola approved power source.