Harbor Freight Tools 96067 ユーザーズマニュアル

Page 27

SKU 96067

Slide the Rip Fence onto the front and back Tubular Guides, and align the Rip

Fence with the edge of a table slot. Then tighten the front Lock.

(see.figure.M.and.assy..diagram,.page.50.)
Align the mounting hole at the rear of the Top Guard with the threaded mounting

hole at the rear of the Table. Then tighten the Handle to secure the Top Guard in

place.

1.

2.

Remove the Knurled Knob from the mounting post on the Miter Gauge. Slip the Clamp

into the slot on the Miter Gauge Handle. Then, reinstall the knurled Knob. Make sure to

screw the knurled Knob down through the Clamp to hold it in place.