Harbor Freight Tools 96067 ユーザーズマニュアル

Page 6

SKU 96067

for technical questions, please call 1-800-444-3353.

do.not.overreach...keep.proper.footing.and.balance.at.all.times.. Proper

footing and balance enables better control of the power tool in unexpected

situations.
Use safety equipment. Always wear ANSI-approved safety impact

...........goggles.when.using.this.product...Dust mask or respirator,

nonskid safety shoes, hard hat, or hearing protection must be used for

appropriate conditions. Always wear ANSI-approved safety goggles and

a dust mask/respirator when using or performing maintenance on this tool.

tooL.Use.and.CaRe

do.not.force.the.tool...Use.the.correct.tool.for.your.application.. The correct

tool will do the job better and safer at the rate for which it is designed. Do not

force the tool and do not use the tool for a purpose for which it is not intended.
do.not.use.the.Metal/Woodworking.Machine.if.its.power.switch.does.not.

turn.it.on.or.off...Any equipment that cannot be controlled with the Power Switch

is dangerous and must be replaced.
turn.off.the.power.switch.and.disconnect.the.power.Cord.before.making.

any.adjustments,.changing.accessories,.or.storing.the.Metal/Woodworking.

Machine...Such preventive safety measures reduce the risk of starting the

tool accidentally.

..always.turn.off.the.power.switch.and.disconnect.the.

power.Cord.before.performing.any.inspection,.maintenance,.or.cleaning.

procedures.
store.idle.tools.out.of.reach.of.children.and.other.untrained.persons...Tools

are dangerous in the hands of untrained users.
Maintain.tools.with.care...keep.the.Metal/Woodworking.Machine.clean.

Properly maintained tools are less likely to malfunction and are easier to control.

Do not use a damaged tool. Tag damaged tools “Do not use” until repaired.
Check.for.misalignment.or.binding.of.moving.parts,.breakage.of.parts,.

and.any.other.condition.that.may.affect.the.tool’s.operation...if.damaged,.

have.the.tool.serviced.before.using. Many accidents are caused by poorly

maintained tools.
Use.only.accessories.that.are.recommended.by.the.manufacturer.for.your.

model...Accessories that may be suitable for one tool may become hazardous

when used on another tool.

seRviCe

Tool service must be performed only by qualified repair personnel. Service

or maintenance performed by unqualified personnel could result in a risk of injury.