JAI 141PMCL-RA マニュアル

目次

• 1. General

  7
• 2. Camera nomenclature

  7
• 3. Main Features

  8
• 4. Locations and Functions

  9
• 4.1. CM-141MCL/CB-141MCL

  9
• 4.2. CM-141PMCL/CB-141PMCL

  10
• 5. Pin Assignment

  11
• 5.1 12-pin Multi-connector (DC-in/GPIO/I

  11
• 5.2 Digital Output Connector for Mini Ca

  11
• 5.2.1 CM-141MCL/-RA and CB-141MCL/-RA

  11
• 5.2.2 CM-141 PMCL /-RA and CB-141 PMCL/

  12
• 5.3 DIP switch SW600

  12
• 5.4 Input and output circuits

  13
• 5.4.1 Iris video output

  13
• 5.4.2 Trigger input

  13
• 5.4.3 XEEN output

  13
• 5.4.4 Camera Link interface

  14
• 5.4.5 Video Output Bit allocation

  15
• 6. Functions and Operations

  16
• 6.1. Basic functions

  16
• 6.1.1 Vertical Binning (CM-141MCL only

  16
• 6.1.2 CB-141MCL Bayer mosaic filter

  17
• 6.1.3 Partial Scanning (fixed rate and

  17
• 6.1.4 Electronic Shutter

  19
• 6.1.5 Auto-Iris Lens video output (12-

  20
• 6.1.6 Auto-detect LVAL-sync / async ac

  20
• 6.1.7 Rear panel indicator.

  21
• 6.2. Sensor Layout and timing

  22
• 6.2.1 CCD Sensor Layout

  22
• 6.2.2 Horizontal timing

  23
• 6.2.3 Vertical timing

  23
• 6.2.4 Partial Scanning

  24
• 6.2.5 Vertical binning

  25
• 6.3. Operation Modes

  26
• 6.3.1 Continuous operation

  26
• 6.3.2 Edge Pre-select (EPS) Trigger Mo

  27
• 6.3.3 Pulse Width Control (PWC) Trigge

  28
• 6.3.4 Reset Continuous (RCT) trigger m

  30
• 6.3.5 Smear less EPS Trigger mode

  31
• 6.4. Operation Mode and Functions matr

  32
• 7. Configuring the Camera

  33
• 7.1 RS-232C control

  33
• 7.2 Setting functions

  34
• 7.2.1 Bit allocation. BA=0, BA=1, BA=2

  34
• 7.2.2 Partial scan. SC=0 through 5.

  34
• 7.2.3 Vertical binning VB=0, VB=1

  34
• 7.2.4 Shutter mode. SM=0 and SM=1

  34
• 7.2.5 Trigger input select. TI=0, TI=1.

  34
• 7.2.6 Trigger polarity. TP=0, TP=1.

  34
• 7.2.7 Gain level. GA=-84 through +670

  34
• 7.2.8 Black level. BL=255 through BL=767

  34
• 7.3 Save and Load Functions.

  34
• 7.4 CM-140MCL / CB-140MCL command lis

  35
• 8. Camera Control Tool for CM-141 MCL /

  37
• 8.1 Camera Control Tool Interface

  37
• 8.1.1 Camera Control Tool Bar

  37
• 8.2 The About Window

  37
• 8.3 Communication Window

  38
• 8.4 Camera Control Window

  39
• 8.5 Using the Camera Control Tool

  40
• 9. External Appearance and Dimensions

  41
• 10. Specifications

  45
• 10.1 Spectral response

  45
• 10.2. Specification table

  46
• 11. Appendix

  48
• 11.1. Precautions

  48
• 11.2. Typical Sensor Characteristics

  48
• 11.3. Caution when mounting a lens on

  48
• 11.4. Caution when mounting the camera

  49
• 11.5. Exportation

  49
• 11.6. References

  49
• Change History

  51
• User's Record

  52