ユーザーズマニュアル目次Master Table of Contents8Safety2Section A - Installation9Section B - Operation17Section C - Accessories29Section D - Maintenance31Section E - Theory of Operation35Section F - Troubleshooting & Repair41Symptoms44Major physical or electrical damage is evident when the sheet metal cover(s) are removed.44The machine is dead—no fan –no output—no LEDs.44The main input fuses or breakers repeatedly fail.44No or low output. Error code “E11” is flashing on the digital display.45No or low output. Error code “E12” is flashing on the digital display.45No output. Error code “E10” is flashing on the digital display. The thermal indicator light is on.45Error code “E20”, “E24”, or “E25” is flashing on the digital display.46The machine functions normally except the cooling fan does not operate.46No High Frequency when the torch trigger is pulled and the machine is in the TIG mode.46Error code “E14” is flashing of the digital display46No current regulation in the Stick mode. Low open circuit voltage.47There is no response to changes to the output control settings. No current regulation in all modes.47The machine does not have welding output in the Stick mode. Zero volts open circuit voltage. The Output LED on the control panel is blinking. The machine operates correctly in the TIG mode48The machine does not have welding output in either the Stick or TIG modes. Zero volts open circuit. The Output LED on the control panel is blinking.48The machine operates properly in the Stick and DC TIG modes. AC TIG mode does not function properly.48Section G - Electrical Diagrams111サイズ: 7.03MBページ数: 112Language: Englishマニュアルを開く