ユーザーズマニュアル目次Foreword31 Safety Precautions71.1 UL Installation71.2 General71.3 During Use71.4 Service and Maintenance81.5 Dismantling and Scrapping82 Installation92.1 Space Requirements92.2 Installation Process91. Unpack and check the delivery. If damage is found, notify the supplier.92. Place the panel cut out where the operator terminal is to be situated, draw along the outer sides of the holes and cut according to the markings. If access to the text strip is needed, add extra space in the lower left corner.93. Secure the operator terminal in position, using all the fastening holes and the provided brackets and screws:104. Connect the cables in the specified order.105. Carefully remove the laminated film over the operator terminal display, to avoid static electricity that could damage the terminal.102.2.1 Mode Switches112.2.2 Connections to the Controller112.2.3 Other Connections and Peripherals113 Technical Data134 Chemical Resistance154.1 Metal Casing154.2 Keyboard and Display154.2.1 Autotex F157154.2.2 Display Surface165 Operator Terminal Drawings195.1 Communication Ports195.2 E1070 Outline205.3 E1070 Text Strip21サイズ: 859KBページ数: 24Language: Englishマニュアルを開く