Runco CL-500 マニュアル

ユーザーズマニュアル (English)ユーザーズマニュアル (English)ユーザーズマニュアル (English)

ユーザーズマニュアル

目次

ON
11
Hold down this button for ONE second to turn on the unit.
11
OFF
11
Press this button to turn off the unit.
11
ANAMORPHIC: For 16: 9 DVDs.
11
4 X 3: The input signal will be scaled to fit 4: 3 display mode in the center of screen.
11
LETTERBOX: Letter box mode. Image in letter box format is enlarged to fit 16:9 full screen displa...
11
VIRTUAL WIDE: 4:3 image is enlarged NON- linearly in horizontal direction to fit 16: 9 full scree...
11
VIDEO: Composite video signal input.
11
S-VIDEO: S-Video signal input
11
COMPONENT: Component Y/ CB/CR input
11
COMPONENT HD: DTV Y/ PB/PR signal input
11
RGB HD: DTV RGBHV signal input
11
PC: Computer signal input
11
PIP (Picture in Picture)
11
Enable the PIP function. Use ARROW keys to adjust the position of the PIP window (see "PIP functi...
11
ACTIVE: Switch to the active window in PIP display mode.
11
PIP+: Enlarge the size of PIP window.
11
PIP-: Shrink the size of PIP window.
11
LIGHT: Turn on the backlight of remote control.
11
CUSTOM
11
Recall memory 1 ~ 3 sequentially (see "Selecting Video Memory" on page16).
11
PICTURE
11
Access the Picture Setting menu (see "PICTURE Setting Page" on page18).
11
ARROW (Å/É/Ç/Ñ)
11
Use to select the menu or to make various adjustments.
11
ENTER
11
Enter the setting of items in the menu.
11
EXIT
11
Exit and save the setting(s) of items in the menu.
11
MENU
11
Turns on /off the on-screen display menu.
11
Runco CL-500 Video Projector
5
User’s Manual
5
- Thank you for your purchase of this quality Runco video projector! It has been designed to provid...
  5
WARNING
5
- This symbol is intended to alert the user to the presence of uninsulated " dangerous voltage " wi...
  5
- This symbol is intended to alert the user to the presence of important operating and maintenance ...
  5
- This equipment has been tested and found to comply with the limits for a Class B digital device, ...
  5
- 1. Read these instructions.
  5
- 2. Keep these instructions.
  5
- 3. Heed all warnings.
  5
- 4. Do not use this projector near water, outdoors or otherwise exposed to the elements.
  5
- 5. Clean only with a dry cloth.
  5
- 6. Do not block any ventilation openings.
  5
- 7. Do not install near any heat sources such as radiators, heat registers, stoves, or other appar...
  5
- 8. Do not defeat the safety feature of the polarized or grounding type plug. A polarized type plu...
  5
- 9. The RJ11 telephone jack of RS323C port does not connect for telephine line connection.
  5
- 10. The 12V trigger only output DC 12V signal for triggering. Do not connect to any other power i...
  5
- 11. Only use accessories specified by RUNCO International.
  5
- 12. Keep the packing material in case the projector should ever need to be shipped.
  5
- 13. Unplug this projector during lightning storms or when it will not be used for an extended per...
  5
- 14. The lamp becomes extremely hot during operation. Allow the projector to cool down for approxi...
  5
- 15. Refer all servicing to qualified service personnel. Servicing is required when the projector ...
  5
Table of Contents
6
1. Overview
7
- Features
  7
- Location
  8
  - Front / Upper Side
    8
  - Rear / Bottom Side
    8
- Controls and Functions
  9
  - Control Panel
    9
- Zoom Ring
  9
- Adjust the size of the image
  9
  - Rotate right to enlarge the image, and rotate left to make the image smaller.
    9
  - 4.
    9
- Focus Ring
  9
- Adjust the focus of the image
  9
  - Rotate the focus ring right or left to focus the image.
    9
  - Connector Panel
    10
    - 1.
      10
    - Video (RCA Jack)
      10
    - Composite video signal input.
      10
    - 2.
      10
    - S-Video (mini DIN 4-pin)
      10
    - Y/C (S-video) signal input
      10
    - 3.
      10
    - Component (RCA Jacks)
      10
    - 480i Component (Y/CB/CR) video signal input
      10
    - 4.
      10
    - RGB/ HDTV (BNC)
      10
    - DTV Y/PB/PR or DTV RGB video signal input.
      10
    - 5.
      10
    - Computer (D-Sub 15-pin)
      10
    - RGB Computer signal input.
      10
    - 6.
      10
    - RS-232C (RJ-11 Jack)
      10
    - RS-232C control signal input.
      10
    - 7.
      10
    - 12v Trigger (mini jack)
      10
    - +12V output, active when the projector is turned on.
      10
  - Remote Control
    11
2. Installation
12
- Remote Control
  12
  - Push and slide to open the cover. Install the two AAA batteries with the correct polarity, then c...
    12
    - Notes on Batteries
      12
    - Notes on Remote Control Operation
      12
      - Make sure that there is nothing obstructing the infrared beam between the remote control and the ...
        12
      - The useable range is between 3m (from the front of the projector) and 4m (from the rear of the pr...
        12
- Projector
  12
  - Connect the Power Cord
    12
- Plug the supplied power cord into the AC inlet in the rear of this unit.
  12
- Turn on the main power switch in the rear of this unit (next to the AC inlet). The POWER LED will...
  12
3. Connecting
16
- When connecting, make sure to:
  16
- 1. Turn off all equipment before making any connections.
  16
- 2. Use the correct signal cables for each source.
  16
- 3. Ensure the cables are firmly connected.
  16
- 4. Connect all audio signals to external speakers. This projector is not equipped with speakers.
  16
- Connecting Video Inputs
  16
- Connecting a Computer
  18
  - This unit only supports resolutions up to XGA. If the input signal is greater than XGA, the proje...
    18
4. Basic Operation
19
- Turning on the Power
  19
- Zoom/ Focusing
  19
  - Adjust the projection image size you need with the zoom ring on the lens. To focus the image, rot...
    19
    - Focus
      19
- Selecting Input Source
  19
  - When this unit is turned on, it will search for the input source you selected last time.
    19
  - You may select the input source directly on the remote control.
    19
- Selecting "ASPECT ratio"
  20
- Selecting Video Memory
  20
  - Press the CUSTOM button to recall a setting in the memory. Each time you press this button, the u...
    20
- Setting Menu
  20
- PIP function
  21
- Turning off the Power
  21
  - Press the OFF key on the remote control to turn off the unit
    21
  - After turning off the unit, the POWER LED will blink green and the fans will operate for 1 minute...
    21
5. Menu
22
- Using the Menu
  22
  - This unit is equipped with an on screen display (OSD) menu for making various adjustments and set...
    22
  - There are 3 different menu languages; page21 Language setting for more details.
    22
- PICTURE Setting Page
  22
- DISPLAY Setting Page
  23
- ENVIRONMENT Setting Page
  25
- INSTALL Setting Page
  25
6. Additional Information
26
- Warning Message
  26
- Replace the Lamp
  26
- Troubleshooting
  27
- Specifications
  28
- Optical Characteristics
  28
  - Projection System
    28
  - Single chip DLPTM system.
    28
  - DMD Chip
    28
  - 0.7" DMD, 848 x 600 pixels.
    28
  - Lens
    28
  - 1.3 times zoom ratio, f 31 to 44mm ± 5 mm, F 2.81 - 3.1
    28
  - Focus distance
    28
  - 1.5m -5m
    28
  - Projection Size
    28
  - 40 to 300 inches
    28
  - Lamp
    28
  - 150W VIP
    28
- Electrical Characteristics
  28
- Input/Output
  28
- General Characteristics
  28
  - Dimensions
    28
  - 400L x 347W x 116H (mm)
    28
  - Weight
    28
  - 14.8 lbs (6702 g)
    28
  - Power
    28
  - VAC 100 - 240 Full range switch (50/60Hz), 3 Wire Grounded
    28
  - Power Consumption
    28
  - Max 200 W
    28
  - Operating Temperature
    28
  - 5C to 35C
    28
  - Operating Humidity
    28
  - 20% - 85%
    28
  - Storage Temperature
    28
  - -20C- 60C
    28
  - Storage Humidity
    28
  - 20% - 90%
    28
  - Dimensions
    29
    - Unit: mm
      29
  - RS-232C Control Codes
    29
    - Code
      29
    - Function
      29
    - Code
      29
    - Function
      29
      - X01
        29
      - Power On
        29
      - X41
        29
      - Load memory 2 settings
        29
      - X02
        29
      - Power Off
        29
      - X42
        29
      - Load memory 3 settings
        29
      - X10
        29
      - Menu
        29
      - X46
        29
      - Load default of current source
        29
      - X11
        29
      - Enter
        29
      - X47
        29
      - Save memory 1 settings
        29
      - X12
        29
      - Exit
        29
      - X48
        29
      - Save memory 2 settings
        29
      - X13
        29
      - Up (arrow key)
        29
      - X49
        29
      - Save memory3 settings
        29
      - X14
        29
      - Down (arrow key)
        29
      - X55
        29
      - Switch active source
        29
      - X15
        29
      - Left (arrow key)
        29
      - X56
        29
      - Picture in picture display
        29
      - X16
        29
      - Right (arrow key)
        29
      - X57
        29
      - Picture by picture display
        29
      - X20
        29
      - Switch to Composite input
        29
      - X60
        29
      - Switch language - English
        29
      - X21
        29
      - Switch to S-Video input
        29
      - X61
        29
      - Switch language - French
        29
      - X22
        29
      - Switch to Component input
        29
      - X62
        29
      - Switch language - Spanish
        29
      - X23
        29
      - Switch to D-sub _PC input
        29
      - X85
        29
      - PC input - auto
        29
      - X24
        29
      - Switch to YPBPR input
        29
      - X90
        29
      - Image orientation - floor front
        29
      - X25
        29
      - Switch to BNC_PC input
        29
      - X91
        29
      - Image orientation - ceiling front
        29
      - X35
        29
      - Anamorphic
        29
      - X92
        29
      - Image orientation - floor rear
        29
      - X36
        29
      - Standard
        29
      - X93
        29
      - Image orientation - ceiling rear
        29
      - X37
        29
      - Letter box
        29
      - X94
        29
      - Back light on
        29
      - X38
        29
      - 4:3 full
        29
      - X95
        29
      - Back light off
        29
      - X40
        29
      - Load memory 1 settings
        29

サイズ：

1.48MB
ページ数：

32
Language:

English

マニュアルを開く

ユーザーズマニュアル

目次

サイズ：

1.46MB
ページ数：

32
Language:

English

マニュアルを開く

ユーザーズマニュアル

目次

サイズ：

1.48MB
ページ数：

32
Language:

English

マニュアルを開く