Siemens M35 or S35 사용자 설명서

다운로드
페이지 24
 
The  GB  051  unit  must  be  stocked  always  with  the  mobile  phone  connector 
disconnected  –  when  disconnected  from  external  power  supply,  the  GB 051  is 
supplied from the mobile phone battery and the battery can be damaged by getting 
completely flat. 
 
 
3.  Installation and Setting into Operation 
 
3.1.  Assembly of GSM Remote Supervision 
 
GSM  Remote  Supervision  by  LEVEL  is  designed  for  operation  in  dry  places. 
During assembly avoid hot places and places where device would be exposed to 
direct solar radiation or places close to heating elements. 
Do not place GSM Remote Supervision or aerial mast close to phone exchange 
or  other  electronic  devices  or  lines.  Due  to  high-frequency  electromagnetic field 
these devices could be interfered. 
Due to interference it is not advisable to operate device close to other power or 
high-frequency devices. 
 
 
Before assembly prove by cell phone if there is sufficient level of signal required 
by GSM network in selected place. Pay attention to delay in indicating of signal 
level. 
 
 
When using for protection of property, arrange protection of area against break-in 
by detector. 
 
3.2.  Wiring and connecting the GSM Remote Supervision unit 
 
 
 
Top view 
Connector description 
 
  1)  input/output No. 1 
  2)  input/output No. 2 
  3)  input/output No. 3 
  4)  input/output No. 4 
  5)  input/output No. 5 
  6)  input/output No. 6 
  7)  ground 
  8)  input/output No. 7 
  9)  input/output No. 8 
10)  power supply + 12 V 
Bottom view 
Connector description 
 
1.  Init 
2.  Ground 
3.  Reset 
4.  TxD 
5.  RxD 
6.  +Ucc