Philips X810 사용자 설명서
4
To use the motion sensor
• In
• In
Settings
>
Motion sensor
>
Mute incoming call
or
Snooze mode
, select
On
.
If a call rings, turn over the phone (front side to
back, or back side to front) to mute the ringtone.
back, or back side to front) to mute the ringtone.
To interrupt the sounding alarm in the same way,
check that the
check that the
Snooze
is set to a time interval in
Tools
>
Alarm
To stop the alarm, tap on
Stop
To use the light sensor
• In
• In
Settings
>
Display
>
Light sensor
, select
On
.
The phone will adjust backlight level automatically
according to ambient brightness. For power-saving
purposes, always turn on the light sensor.
according to ambient brightness. For power-saving
purposes, always turn on the light sensor.
Power-saving mode
After the set time span, the phone has the idle
screen turned off automatically. To exit the power-
saving mode, press any key. For power-saving
purpose, set the time span to a low value in
screen turned off automatically. To exit the power-
saving mode, press any key. For power-saving
purpose, set the time span to a low value in
Settings
>
Display
>
Backlight duration
.
Auto keypad lock
In the idle mode, your phone can have the keypad
locked automatically after the set time span. When
the keypad is locked, a set of concentric circles
keep moving on the screen.
locked automatically after the set time span. When
the keypad is locked, a set of concentric circles
keep moving on the screen.
To set the auto keypad lock
Go to
Go to
Settings
>
General
>
Auto keypad lock
.
To unlock the keypad
Drag out the innermost dot. Or, push up the slide.
Drag out the innermost dot. Or, push up the slide.
To lock the keypad manually
On the idle screen, tap on
On the idle screen, tap on
Shortcut
>
Phone lock
.
Or, pull down the slide (if
On
is selected in
Settings
>
General
>
Active slide lock
).