Sony UPX-C200 사용자 설명서
Various Functions
32
Various Functions
Using the Camera with Batteries
You can operate the camera with the inserted NH-AA
batteries. To use the camera with the batteries, charge
the batteries using the supplied battery charger.
The batteries may not be fully charged when they are
used for the first time or they have not been used for a
long period of time. In such a case, repeat charging and
discharging a few times.
batteries. To use the camera with the batteries, charge
the batteries using the supplied battery charger.
The batteries may not be fully charged when they are
used for the first time or they have not been used for a
long period of time. In such a case, repeat charging and
discharging a few times.
For details on discharging, see “Refreshing batteries”
on page 33.
on page 33.
Notes
• Operation time of the batteries varies according to the
temperature and operating conditions. It is
recommended to use fully charged batteries or an AC
power adaptor to shoot pictures securely.
recommended to use fully charged batteries or an AC
power adaptor to shoot pictures securely.
• When the built-in flash lights, battery power is quickly
consumed. Charging the flash with the batteries
requires longer time than charging it with the AC
power adaptor.
requires longer time than charging it with the AC
power adaptor.
Charging batteries
1
Put the batteries in the battery charger with the
correct polarity.
correct polarity.
2
Connect the battery charger to the wall outlet.
The CHARGE lamp lights, and charging begins. It
takes about 230 minutes to charge four batteries.
When the batteries are fully charged, the CHARGE
lamp goes out.
takes about 230 minutes to charge four batteries.
When the batteries are fully charged, the CHARGE
lamp goes out.
3
Disconnect the battery charger from the wall outlet,
and remove the batteries.
and remove the batteries.
Notes
• Do not charge batteries other than the NH batteries.
Otherwise the batteries may be damaged.
• Insert the batteries firmly.
• When charging batteries that have not been used for a
• When charging batteries that have not been used for a
long period of time, charging may stop before they are
fully charged. In such a case, disconnect the battery
charger from the wall outlet, and reconnect it to start
charging again. Then the batteries may be fully
charged.
fully charged. In such a case, disconnect the battery
charger from the wall outlet, and reconnect it to start
charging again. Then the batteries may be fully
charged.
• Charge batteries that are used out.
• Charge the batteries in a place with an ambient
• Charge the batteries in a place with an ambient
temperature between 10°C and 30°C (50°F to 86°F).
• Be sure to connect the battery charger securely.
• Do not insert or remove batteries with the battery
• Do not insert or remove batteries with the battery
charger connected to the wall outlet.
• The battery charger and batteries may become hot
during charging, but this is not a malfunction.
• After charging batteries, they become very hot. Be
careful about touching them.
• During charging, a TV, radio or tuner may receive
noise. In such a case, use a wall outlet far from the TV,
radio or tuner.
radio or tuner.
Ni-MH
BATTERY CHARGER
AA OR AAA SIZE
Battery charger
Batteries
Ni-MH
BATTER
Y CHARGER
AA OR AAA
SIZE
CHARGE lamp
to wall outlet