Sony CSS-HD2 매뉴얼

다운로드
페이지 96
1-GB
The Remote Commander range is less than 
five meters (for indoor use). Point the Remote 
Commander at the remote sensor of the Cyber-
shot Station. Try adjusting the angle of the 
Remote Commander if you cannot operate the 
Cyber-shot Station.
Placing the camera on the 
Cyber-shot Station 
Remove the Adaptor ring, the Conversion lens, 
etc. from the camera.
Attach the camera as shown below.
Be sure to turn off the camera before placing it on 
the Cyber-shot Station.
When attaching the camera, make sure to insert 
the camera straight down.
 Tips
Make sure that the camera is securely attached to 
the Cyber-shot Station.
Removing the camera from 
the Cyber-shot Station 
Hold the Cyber-shot Station down when you 
remove the camera from the Cyber-shot Station.
 Notes
When removing the camera, make sure to lift the 
camera straight up. It may damage the camera or 
the Cyber-shot Station when some extra force is 
added to the front or the sides.
Charging the battery pack 
Place the camera with the battery pack 
inserted on the Cyber-shot Station.
Charging starts automatically. The CHARGE lamp 
of the Cyber-shot Station lights up.
When the camera is turned on, the Cyber-shot 
Station cannot charge the battery pack.
When the charging reaches to Normal charge*, 
the CHARGE lamp goes off.
Recording and playback time with Normal 
charge is approximately 90% of Full charge.
For the time of the full charge for a completely 
discharged battery at the temperature of 25 °C 
 (77 °F), see the table below.
DSC-T300/T75/T70/T2
Approx.
160 minutes
DSC-
W300/W170/W150//W130/
W125/W120/W115/W110
Approx.
230 minutes
It may take longer to charge, depending on the 
charging condition and environment.
*