Sony DSC-V3 사용자 설명서

다운로드
페이지 156
13
Getting started
   
Charging the battery pack
 
1
2
1
 Open the battery/“Memory 
Stick”/CF card cover.
Slide the cover in the direction of the 
arrow. 
  Be sure to turn off your camera when 
charging the battery pack (page 17).
•  Your camera operates with the 
“InfoLITHIUM” NP-FR1 battery pack (R 
type) (supplied). You can use only R type 
battery pack (page 146).
 
2
 mark
Battery eject lever
 Install the battery pack, then 
close the battery/“Memory 
Stick”/CF card cover.
 Make sure the battery pack is fi rmly 
inserted all the way, then close the cover.
 Battery insertion slot
Insert the battery pack 
so that tip of the 
 
marks on the side of the 
battery pack face the tip 
of the 
 mark on the 
battery insertion slot.
•  The battery pack is easily inserted by pushing 
the battery eject lever at the front of the battery 
compartment toward the LCD screen. 
 
3
DC IN jack cover
AC Adaptor
DC plug
 Open the DC IN jack cover 
and connect the AC Adaptor 
(supplied) to the DC IN jack of 
your camera.
Connect the plug with the 
 mark facing 
left.
 
•  Do not short the DC plug of the AC Adaptor 
with a metallic object, as this may cause 
malfunction.
•  Clean the DC plug of the AC Adaptor with a 
dry cotton bud. Do not use the dirty plug. Use 
of the dirty plug may not properly charge the 
battery pack.