Sony DSC-W1 사용자 설명서
108
Self-diagnosis display
– If a code starting with an alphabet
letter appears
letter appears
Your camera has a self-diagnosis display.
This function displays the camera condition
on the LCD screen with a combination of a
letter and four numerical digits. If this
occurs, check the following code chart and
attempt the corresponding corrective
actions. The last two digits (indicated by
ss) will differ depending on the state of
the camera.
This function displays the camera condition
on the LCD screen with a combination of a
letter and four numerical digits. If this
occurs, check the following code chart and
attempt the corresponding corrective
actions. The last two digits (indicated by
ss) will differ depending on the state of
the camera.
C:32:ss
Self-diagnosis display
If you are unable to solve the problem even after trying the corrective actions a few times,
contact your Sony dealer or local authorized Sony service facility.
contact your Sony dealer or local authorized Sony service facility.
Code
Cause
Countermeasure
C:32:
ss
There is trouble with your
camera’s hardware.
camera’s hardware.
• Turn the power off and on again
C:13: ss
The camera cannot read or write
data on the “Memory Stick.”
data on the “Memory Stick.”
• Re-insert the “Memory Stick” several
times.
An unformatted “Memory Stick”
is inserted.
is inserted.
• Format the “Memory Stick” (page 43).
The inserted “Memory Stick”
cannot be used with your camera,
or the data is damaged.
cannot be used with your camera,
or the data is damaged.
• Insert a new “Memory Stick” (page 20).
E:61: ss
E:91: ss
E:92: ss
E:91: ss
E:92: ss
A camera malfunction that you
cannot reverse has occurred.
cannot reverse has occurred.
• Press the RESET button (page 96) located
on the bottom of the camera, then turn the
power on again.
power on again.