Concord Camera 5062AF 사용자 설명서
8
En
INTERNAL MEMORY/INSERTING THE MEMORY CARD
Internal Memory
The camera is equipped with 16MB of internal memory, which can be used right away.
The camera is equipped with 16MB of internal memory, which can be used right away.
Status
Memory in Use
Memory card is not inserted.
Internal Memory
Memory card is inserted.
Memory Card
NOTE!: The files stored in the internal memory will remain in the internal memory until the Transferring Files
feature is selected. Please refer to the Transferring Files section on page 36.
feature is selected. Please refer to the Transferring Files section on page 36.
Inserting the Memory Card
In addition to having a 16MB internal memory, the camera can use Secure Digital (SD) memory cards to store
images and video clips.
In addition to having a 16MB internal memory, the camera can use Secure Digital (SD) memory cards to store
images and video clips.
1. Slide the Battery/Memory Card door in the direction of the arrow (fig. 1.1), and lift it open.
2. Insert the memory card in the direction as shown in fig.1.2, and push it firmly into the SD card slot as far as
2. Insert the memory card in the direction as shown in fig.1.2, and push it firmly into the SD card slot as far as
it will go. A click sound can be heard when the SD card is fully engaged.
3. Close the Battery/Memory Card door. (fig. 1.3) Make sure it’s closed securely.
Removing the Memory Card
1. Press the memory card with the finger-tip. The card will eject up.
2. Pull the card out.
1. Press the memory card with the finger-tip. The card will eject up.
2. Pull the card out.
Note:
• The camera can support SD cards up to 512 MB.
• When the SD card is inserted, power on the camera, the camera will first check if the SD card is valid. If it
• The camera can support SD cards up to 512 MB.
• When the SD card is inserted, power on the camera, the camera will first check if the SD card is valid. If it
is, it will set the SD card as storage; otherwise it will request for formatting. Format the SD card (refer to
p.41) if you want to use the SD card as storage, otherwise the memory locked icon will be shown on the
LCD and Shutter button will be disabled.
p.41) if you want to use the SD card as storage, otherwise the memory locked icon will be shown on the
LCD and Shutter button will be disabled.
• If the SD card is locked, when the camera is powered on, no image can be taken by pressing the Shutter
button. In this case, please power off the camera first, then take out the SD card and unlock the SD card,
and then reload the SD card.
and then reload the SD card.
GETTING STARTED
fig.1.1
fig.1.2
fig.1.3
DC4062-5062 UG(514173-00)-E 8
5/31/04, 9:56:14 AM