Hitachi CU-HD1500 사용자 설명서
8
System Configuration
3．DC power supply operation
By carrying out the external input of the camera side power supply, long-distance cable transmission
becomes possible.
Directions for operation are as follows.
1) Between CU-HD1500 (camera control unit) is connected with CA-HF1500 (camera adaptor) by a
single mode fiber cable.
2) The power supply of CU-HD1500 is switched on.
3) The menu of CU-HD1500 is displayed.
4) "CABLE MODE" of a CU-FUNCTION menu is set as SINGLE.
becomes possible.
Directions for operation are as follows.
1) Between CU-HD1500 (camera control unit) is connected with CA-HF1500 (camera adaptor) by a
single mode fiber cable.
2) The power supply of CU-HD1500 is switched on.
3) The menu of CU-HD1500 is displayed.
4) "CABLE MODE" of a CU-FUNCTION menu is set as SINGLE.
(*）The selection only of the time of STBY mode(CAM POWER:OFF) is attained.
5) A power supply is inputted into the DC IN connector of CA-HF1500.
6）PWR SW of CA-HF1500 is set as EXT.
6）PWR SW of CA-HF1500 is set as EXT.
CU-FUNCTION MENU SCREEN
Camera Head
SK-HD1500
Optical Cable
SINGLE
Camera control unit
CU-HD1500
Remote Control Unit
RU- 1500
Camera Adaptor
AC input
DC12V
AC/DC
converter
AC input
CA-HF1500
■CU-FUNCTION
BUZZER :ENABLE
SDI AUDIO :OFF
CCU ID : 1
CABLE MODE: SINGLE
SYS FORMAT 1080i
59.94Hz
TIME/DATE: '12.01.01
BUZZER :ENABLE
SDI AUDIO :OFF
CCU ID : 1
CABLE MODE: SINGLE
SYS FORMAT 1080i
59.94Hz
TIME/DATE: '12.01.01
12:00