Pentax W 20 사용자 설명서

5

In this manual, the capture mode, such as for taking still pictures, is 
referred to as [A mode]. The playback mode, such as for displaying 
captured images on the LCD monitor, is referred to as [Q mode]. In Q 
mode, you can perform simple editing operations on the images that are 
played back.
Follow the procedure below to switch between A mode and Q mode.

Press the Q button.

The camera switches to 

Q

 mode.

Press the Q button or shutter release button halfway.

The camera switches to 

A

 mode.

Refer to “Playing Back Images” (p.42) for instructions.

To Switch Between A Mode and Q Mode

To Switch from A Mode to Q Mode

To Switch from Q Mode to A Mode

Displaying data in the built-in memory
When an SD memory card is set in the camera, images, movies, and 
sounds in the SD memory card are displayed. If you want to display 
images, movies, and sounds in the built-in memory, remove the SD 
memory card.

 

• When switching from capture mode to playback mode, you can display 

images, movies, and sounds in the built-in memory while the SD memory 
card is inserted by pressing the playback button for more than one second.

• In built-in memory display, you can play back still pictures (including enlarged 

display) (p.42, p.117), movies (p.122), and sounds (p.156), and switch 
between nine-image display, folder display, and calendar display (p.116).

• In built-in memory display, you cannot delete data, delete a selection, display 

the Playback Mode Palette, or display the menu. If you want to perform any 
of these operations on images, movies, or sounds in the built-in memory, do 
so after removing the SD memory card.