Pentax W 20 사용자 설명서

4

R q < B i \ E  4 Q D N J R

In this mode, pictures are taken continuously for as long as the shutter 

release button is pressed.

Press the four-way controller (2) in A mode.

Use the four-way controller (453) 

to select 1 (Continuous Shooting) 

or c (HS Cont. Shooting) and press 

the 4 button.

The camera is ready to take a series of pictures.

The focus frame on the LCD monitor turns green if the subject is in focus.

Pictures are taken continuously for as long as you keep the shutter 

release button pressed.

1

Continuous 

Shooting

Each time a picture is taken, the image is saved in the memory 

before the next image is taken. The higher the image quality, 

the longer the interval between shots.

c

HS Cont. 

Shooting

Pictures are taken continuously at a speed of 3 frames per 

second until the buffer memory is full.

• The flash will not discharge in Continuous Shooting and High 

Speed Continuous Shooting mode.

• The continuous shooting function is not available in 5, A, C, 

O

, Y, I, Q, C, X, >, y or 9 mode.

• You can continue shooting until the memory capacity of the SD 

Memory Card or built-in memory is full.

• The interval of continuous shooting will vary according to the 

Recorded Pixels and Quality Level settings.

• The number of recorded pixels is fixed at h in high speed 

continuous shooting mode. When shooting mode is set to R, the 

number of recorded pixels is set to V (1280×960).

• The focus, exposure and white balance are locked with the first image.