Technicolor - Thomson RP5430 사용자 설명서

2-4

Operator’s Manual LDK 200 Triax

Assembling the Units

To mount the 1.5-inch viewfinder proceed as follows:
a. Loosen locking ring 

1

 of viewfinder support bracket

2

 at the front of the camera handle. (As seen from

the rear of the camera, turning the locking ring
counterclockwise moves it towards the handle.)

b. Slide the viewfinder onto the viewfinder support

bracket.

c. Tighten the locking ring 

1

 by turning it clockwise

(as seen from rear) so that the viewfinder is
mounted securely to the support.

d. Connect the viewfinder cable to the viewfinder

connector socket 

6

 at the top right of the camera.

e. Slide the microphone holder 

4

 onto the viewfinder

and secure with the knurled screw 

5

.

Always fit the microphone holder 

4

 as it

functions as a safety stop for the viewfinder.

f. To improve the comfort of the skin contact when

using the viewfinder, fit the eye piece cover 

3

 to

the rubber eyepiece.

The horizontal position of the viewfinder can be
adjusted as follows to suit your requirements:
a. Loosen the locking ring 

1

. (As seen from the rear

of the camera, turning the locking ring
counterclockwise moves it towards the handle.)

b. Slide the viewfinder horizontally along the rail to

the desired position.

c. Tighten the locking ring 

1

 by turning clockwise.

The dioptre hood and eyepiece of the viewfinder can
be rotated vertically.

The viewfinder can be positioned backwards and
forwards along the camera axis. Loosen the support
bracket round bar retaining lever 

2

 and slide the round

bar 

3

 forwards or backwards. When the desired

position is reached tighten the support bracket round
bar retaining lever 

2

 again.

To use the viewfinder at a distance press the button

4

 below or above the eyepiece tube and swing it free

of the associated clip 

5

. The display can now be seen

from further away.

1

1

2

2

3

3

4

4

5

5

6