Philips BDP2500 사용자 설명서
36
EN
Restrict access to discs that are unsuitable for children. These types of
discs must be recorded
with ratings.
To access, enter your last set password or ‘0000’.
discs must be recorded
with ratings.
To access, enter your last set password or ‘0000’.
Note
Rated discs above the level you set in
•
[Parental Control] require a password to be
played.
The ratings are country-dependent. To allow all discs to play, select ‘
The ratings are country-dependent. To allow all discs to play, select ‘
•
8’ for DVD-video
and BD-Video.
Some discs have ratings printed on them but are not recorded with ratings. This
Some discs have ratings printed on them but are not recorded with ratings. This
•
function has no effect on such discs.
[Screen Saver]
Turn on or off the screen saver mode. It helps to protect the TV screen
from being damaged due to over exposure to static image for being too
long.
•
Turn on or off the screen saver mode. It helps to protect the TV screen
from being damaged due to over exposure to static image for being too
long.
•
[On] - Set the screen saver active after 10 minutes of inactivity (for
example, in the pause or stop mode)
example, in the pause or stop mode)
•
[Off] - Disable screen saver mode.
[Change Password]
Set or change the password.
Set or change the password.
1) Press the Numeric buttons to enter the password or your last set
password. If you forget the password, enter ‘0000’, then press OK.
2) Enter the new password.
3) Enter the same password again.
4) Move to [Confirm] in the menu and press OK.
password. If you forget the password, enter ‘0000’, then press OK.
2) Enter the new password.
3) Enter the same password again.
4) Move to [Confirm] in the menu and press OK.
[Display Panel]
Select a brightness level of the front panel display.
•
Select a brightness level of the front panel display.
•
[Normal] - Normal brightness.
•
[Dim] - To dim display.
[Auto Standby]
Turn on or off auto standby mode. It is an energy saving feature.
•
Turn on or off auto standby mode. It is an energy saving feature.
•
[On] - Switch to standby after 30 minutes of inactivity (for example,
in pause or stop mode).
in pause or stop mode).